Dual Wan WiFi Router

Vigor 2930 Series Dual WAN Router Firewall

Broadband Router/Firewall
Dual Ethernet WAN ports
Load Balancing & WAN Failover
VPN Dial-in/dial-out with VPN hardware co-processor
SSL VPN
VPN Trunking
Comprehensive and Robust Firewall
Content Filtering (by matched keyword or data type)
Web Site Category Filtering & Blocking
Ethernet and WLAN Virtual LAN segmentation (common/distinct)
Configurable QoS Features (For traffic prioritization)
802.11n Draft 2.0 Wireless LAN ('n' models)
Highly configurable and easy to install and manage

1. Dual-WAN
It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.

Outbound Policy-Based Load-Balance
BoD ( Bandwidth on Demand )
WAN Connection Fail-over

2. WAN Protocol

DHCP Client
Static IP
PPPoE
PPTP
L2TP *
BPA

3. Firewall
The SPI ( Stateful packet Inspection ) firewall uses object-based design to make settings of firewall policies easy. The CSM ( Content Security Management ) feature enables more precise and efficient access control for IM ( Instant Messenger ) and P2P ( Peer to Peer ) applications. Furthermore, functions such as DoS / DDoS ( Denial of Service / Distributed DoS ) and URL / Web content filtering minimize security threats both inside and outside the network.

With hardware-based implementation of the VPN protocols, the Vigor2930 supports up to 100 VPN tunnels in compliance with advanced protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1 for authentication.

CSM ( Content Security Management ) for IM / P2P Applications
Multi-NAT, DMZ Host, Port-Redirection and Open Port
Policy-Based Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection )
DoS / DDoS Protection
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address

4. VPN

Up to 100 VPN Tunnels
Protocol : PPTP , IPSec , L2TP , L2TP over IPSec
Encryption : MPPE and Hardware-Based AES / DES / 3DES
Authentication : Hardware-Based MD5 , SHA-1
IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )
LAN-to-LAN , Teleworker-to-LAN
DHCP over IPSec
NAT-Traversal ( NAT-T )
Dead Peer Detection ( DPD )
VPN Pass-Through

5. Bandwidth Management

QoS :
- Guarantee Bandwidth for VoIP
- Class-based Bandwidth Guarantee by User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for each Direction ( Inbound / Outbound )
- Bandwidth Borrowed
Bandwidth / Session Limitation

6. Network Management

Web-Based User Interface ( HTTP / HTTPS )
Quick Start Wizard
CLI ( Command Line Interface, Telnet / SSH* )
Administration Access Control
Configuration Backup / Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP / FTP
Logging via Syslog
SNMP Management MIB-II

7. Content Filter

URL Keyword Blocking ( White List and Black List )
Java Applet , Cookies , Active X , Compressed , Executable , Multimedia File Blocking
Web Content Filter ( SurfControl )
Time Schedule Control

8. Network Features

DHCP Client / Relay / Server
Port-based VLAN
Dynamic DNS
NTP Client
Call Scheduling
RADIUS Client
DNS Cache / Proxy
UPnP
Routing Protocol :
- Static Routing
- RIP V2

Hardware Interface	LAN	4-port 10/100 Base-TX Switch
	WAN	2-port 10/100 Base-TX Ethernet
Dual-WAN	Outbound Policy-Based Load-Balance
	BoD ( Bandwidth on Demand )
	WAN Connection Fail-over
WAN Protocol	DHCP Client
	Static IP
	PPPoE
	PPTP
	L2TP *
	BPA
Firewall	CSM ( Content Security Management ) for IM / P2P Applications
	Multi-NAT, DMZ Host , Port-Redirection and Open Port
	Policy-Based Firewall
	MAC Address Filter
	SPI ( Stateful Packet Inspection )
	DoS / DDoS Protection
	IP Address Anti-spoofing
	E-Mail Alert and Logging via Syslog
	Bind IP to MAC Address
VPN	Up to 100 VPN Tunnels
	Protocol : PPTP, IPSec , L2TP , L2TP over IPSec
	Encryption : MPPE and Hardware-Based AES / DES / 3DES
	Authentication : Hardware-Based MD5 , SHA-1
	IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )
	LAN-to-LAN, Teleworker-to-LAN
	DHCP over IPSec
	NAT-Traversal ( NAT-T )
	Dead Peer Detection ( DPD )
	VPN Pass-Through
Bandwidth Management	QoS	Guarantee Bandwidth for VoIP
		Class-based Bandwidth Guarantee by User-Defined Traffic Categories
		DiffServ Code Point Classifying
		4-level Priority for each Direction ( Inbound / Outbound )
		Bandwidth Borrowed
	Bandwidth / Session Limitation
Network Management	Web-Based User Interface ( HTTP / HTTPS )
	Quick Start Wizard
	CLI ( Command Line Interface ) / Telnet / SSH*
	Administration Access Control
	Configuration Backup/Restore
	Built-in Diagnostic Function
	Firmware Upgrade via TFTP/FTP
	Logging via Syslog
	SNMP Management with MIB-II
Content Filter	URL Keyword Blocking (White list and Black list)
	Java Applet , Cookies , Active X , Compressed / Executable / Multimedia File Blocking
	Web Content Filter ( SurfControl )
	Time Schedule Control
Network Features	DHCP Client / Relay/Server
	Dynamic DNS
	NTP Client
	Call Scheduling
	RADIUS Client
	DNS Cache / Proxy
	UPnP
	Port-Based VLAN
	Routing Protocol		Static Routing
			RIP V2
Temperature	Operating : 0°C ~ 45°C
	Storage : -25°C ~ 70°C
Humidity	10% ~ 90% ( non-condensing )
Max. Power	18 Watt
Dimension	L240.96 * W165.07 * H43.96 ( mm )
Power	DC 15V

Details


SKU	V2930
Weight	5.00 lbs
Keywords	dual wan, vpn
Title	Vigor 2930 Dual Wan Router
Description	Dual Wan Router
Price:	$329.00

Options

Quantity

Add to cart

Add to wish list