Rugged and Weatherproof includes Radome Cover.

The reflector dish of these antennas are constructed from high quality aluminum which gives them superior strength. The dish is coated in a light gray UV-inhibited polymer for durability and aesthetics. The small diameter of the dish helps minimize wind loading.

This antenna is supplied with a tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be adjusted up or down from 0° to 60°.

Radome Cover Kits

Radome Covers are an ideal way to provide additional protection to our parabolic dish antennas. These light weight radome kits feature fiberglass construction and UV stable gray finish. Drain holes are provided on the radome cover to help prevent moisture build-up inside the dish antenna.

These radome kits bolt directly to the dish antennas with the provided stainless steel hardware. Drilling mounting holes in the antenna is not required. The radome cover can be attached to existing antennas already mounted in the field or pre-assemble to the antenna before mounting.

 

Specifications

Model	HL-5824D
Frequency	5725-5850 MHz
Gain	24 dBi
Polarization	Horizontal or Vertical
Horizontal Beam Width	9°
Vertical Beam Width	9°
Front to Back Ratio	30 dB
Impedance	50 Ohm
Max. Input Power	100 Watts
VSWR	< 1.5:1 avg.
Weight	6.6 lbs. (3 kg)
Diameter	17.2 in. (436.8 mm)
Mounting	1.2" (32 mm) to 2" (51 mm) dia. masts
Operating Temperature	-40° C to to 85° C (-40° F to 185° F)
Lighting Protection	DC Short
Connector	N-Female
RoHS Compliant	Yes
Radome Cover Part Number	HGR-04

Wind Loading Data

Wind Speed (MPH)	Loading
100	53 lb.
125	82 lb.

RF Antenna Patterns